Cisco Certified Network Associate (CCNA)

Cisco Certified Network Associate (CCNA) is a certification program for entry-level network engineers that helps maximize your investment in foundational networking knowledge and increase the value of your employer’s network.

Delivery Mode

Training is available in small groups as well as on one-to-one basis. Get in touch.

Batch Timings

For the latest training schedule, please check the Calendar.


6 Modules


35 hours


CCNA 200-301 is Cisco Certified Network Associate (CCNA) Routing and Switching is a certification program for entry-level network engineers that helps maximize your investment in foundational networking knowledge and increase the value of your employer’s network. CCNA Routing and Switching is for Network Specialists, Network Administrators, and Network Support Engineers with 0-2 years of experience. The CCNA Routing and Switching validates the ability to install, configure, operate, and troubleshoot small to medium-size routed and switched networks.


Apr 17th
07:00 AM to 09:00 AM (IST)

Apr 22nd
07:00 AM to 09:00 AM (IST)

Training Type Timing Duration Get Started
Regular [Weekdays]
On Request
2.5 weeks
Regular [Weekends]
On Request
2.5 weekends
Fast Track [5 days]
To be announced

Course Content - What Will You Learn?

  • Describe network infrastructure component – router, switches, firewalls, access points, end-points
    and servers.
  • Network architectures – 2-tier, 3-tier, spine leaf, WAN and SOHO.
  • Compare physical interface and cabling types – copper, PoE and fiber- single-mode and multimode
  • Identify interface and cable issues – collision, errors, mismatch duplex and/or speed
  • Compare TCP to UDP
  • IPv4 addressing and types – public and private
  • Subnetting
  • IPv6 addressing and prefix
  • IPv6 address types – global unicast, link local, unique local, anycast and multicast
  • Verify IP parameters for Client OS [Windows, Linux and MAC]
  • Describe wireless principles – SSID, RF, Encryption and Non-overlapping Wi-Fi Channels.
  • Explain virtualization fundamentals – virtual machines
  • Describe switching concepts – Frame switching and flooding, MAC address table, learning and
  • Virtual LANs – access ports, default VLANs and connectivity
  • Inter-switch connectivity – trunk ports, 802.1q and Native VLAN
  • Layer-2 discovery protocols – CDP and LLDP
  • Etherchannel
  • Rapid Spanning Tree Protocol – root port, root bridge, port states and portfast
  • Cisco Wireless Architecture and AP modes
  • Physical Infrastructure Connections of WLAN components
  • AP and WLC management access connections – Telnet, SSH, HTTP, HTTPS, console and RADIUS
  • Wireless LAN Access – WLAN creation, security settings and QoS settings.
  • Forwarding decisions in a router – longest match, routing protocol and metric
  • Components of routing table – prefix, network mask, next-hop, protocol code, metric and
    administrative distance.
  • IPv4 and IPv6 static routing – default route, network route and floating static
  • OSPFv2 – neighbor formation – point-to-point and broadcast, router-ID
  • First Hop Redundancy Protocols
  • Inside source NAT – static and pool
  • NTP in client and server pool
  • DHCP and DNS in a network
  • SNMP in network operations
  • QoS – classification, marking, queuing, congestion, policing and shaping
  • FTP and TFTP in a network
  • Remote access using SSH
  • Security concepts – threats, vulnerabilities and exploits
  • Security program elements – user awareness, training and physical access control
  • Access control using local passwords
  • Password policies elements – management, complexities and multi-factor authentication
  • Remote access and site-to-site VPNs
  • Access controls lists
  • Layer-2 security – DHCP snooping, ARP inspection and port security
  • Authorization, authentication and accounting concepts
  • Wireless security protocols – WPA, WPA2 and WPA3
  • Impact of automation on network management
  • Traditional networks versus controller based networks
  • Northbound and Southbound APIs
  • Separation of control plane and data plane
  • Cisco DNA center device management
  • REST based APIs – CRUD, HTTP verbs and data encoding
  • Configuration management mechanisms – Puppet, Chef and Ansible
  • Interpret JSON encoded data

Who Should Attend?


35 Hours


There are no formal pre-requisites for CCNA certification but before appearing for the 200-301 CCNA training course, it is recommended that a candidate has the following knowledge and skills before attending this course:

What job roles can I apply for after this course?

After completion of the course you can apply for the following job positions:

Lab Practice

BlueMap has dedicated servers for PaaS, with 99.9% uptime. Candidates will be provided access to individual pods for lab practice. Guidance will also be provided if candidates want to setup a lab environment on their personal machines. A lab guide will be provided to each candidate with scenarios to practice all modules covered in the course because at BlueMap we believe that unless you see it happening you won’t be confident to answer any questions based on the same. There would be scenarios for implementing, verifying and troubleshooting all modules covered in the course.

Frequently Asked Questions

Classes will be conducted online via GoToMeeting.

You will be provided dedicated lab access on our 24x7 available cloud servers during the entire course duration. Each candidate will have his/her own lab scenario for practice. Moreover, if the candidate wants to setup a lab on their machine that support will also be provided by the instructor.

The candidate will be provided with daily class recordings, presentations, lab guides, virtual machines and study notes for practice. All this material will be included in the course fees.

We do not have a refund policy. The candidate will be provided first two sessions free of cost and then the candidate will be asked to pay the course fees.

Yes, the course fees can be paid in two instalments. The first instalment will be payable after the first two free sessions. The second instalment will be payable after 50% course completion.

Placement assistance will be provided to all candidates after course completion. Interview calls be provided to all candidates. Along with that mock interview sessions will also be conducted for all candidates to prepare them for the interview.

Even after the course completion, BlueMap is committed to provide post-training support to all candidates. Post-training support works in two ways. In the first scenario if the candidate does not understand a particular topic he/she can have one-to-one session with the instructor to clear the concept or can attend any other on-going batches. In the second scenario the instructor will provide support to the candidate if he/she is facing issues on job helping candidate to apply knowledge to practice.

cisco certified ccna

Why choose Bluemap?

Get the best return on your investment by choosing our course. BlueMap offers incredible experience to all candidates in the training such that it creates a life-long relationship with us. What makes us say so:

Get started and skill up for the changing world